Linking Tools and Options

This topic describes how to use the Intel® linking tools, xild (Linux* and OS X*) and xilink (Windows*).

The Intel® linking tools behave differently on different platforms. The following sections summarize the primary differences between linking behavior.

Linux* and OS X* Linking Behavior Summary
The linking tool invokes the Intel® Fortran Compiler to perform IPO if objects containing `IR` (intermediate representation) are found. These are mock objects. The tool invokes GNU ld to link the application. The command-line syntax for xild is the same as that of the GNU linker: xild [<options>] <normal command-line> where: `[<options>]`: One or more options supported only by xild (optional). `<normal command-line>`: Linker command line containing a set of valid arguments for ld. To create the file `app` using IPO, use the option o`[filename]` as shown in the following example: xild -qipo-fas -oapp a.o b.o c.o The linking tool calls the compiler to perform IPO for objects containing IR and creates a new list of object(s) to be linked. The linker then calls ld to link the object files that are specified in the new list and produce the application with the name specified by the o option. The linker supports the ipo[`n`] and ipo-separate options. To display a list of the supported link options from xild, use the following command: $ xild -qhelp

Linux* and OS X* Linking Behavior Summary

The linking tool invokes the Intel® Fortran Compiler to perform IPO if objects containing IR (intermediate representation) are found. These are mock objects. The tool invokes GNU ld to link the application.

The command-line syntax for xild is the same as that of the GNU linker:

xild [<options>] <normal command-line>

where:

[<options>]: One or more options supported only by xild (optional).
<normal command-line>: Linker command line containing a set of valid arguments for ld.

To create the file app using IPO, use the option o[filename] as shown in the following example:

xild -qipo-fas -oapp a.o b.o c.o

The linking tool calls the compiler to perform IPO for objects containing IR and creates a new list of object(s) to be linked. The linker then calls ld to link the object files that are specified in the new list and produce the application with the name specified by the o option. The linker supports the ipo[n] and ipo-separate options.

To display a list of the supported link options from xild, use the following command:

$ xild -qhelp

Windows* Linking Behavior Summary
The linking tool invokes the Intel® Fortran Compiler to perform multi-file IPO if objects containing `IR` (intermediate representation) is found. These are mock objects. It invokes the Microsoft linker link.exe to link the application. The command-line syntax for the Intel® linker is the same as that of the Microsoft linker: xilink [<options>] <normal command-line> where: `[<options>]`: One or more options supported only by xilink (optional). `<normal command-line>`: Linker command line containing a set of valid arguments for the Microsoft linker. To place the multifile IPO executable in ipo_file.exe, use the linker option out`:[filename]`, for example: xilink -qipo-fas /out:ipo_file.exe a.obj b.obj c.obj The linker calls the compiler to perform IPO for objects containing `IR` and creates a new list of object(s) to be linked. The linker calls Microsoft link.exe to link the object files that are specified in the new list and produce the application with the name specified by the out`:[filename]` linker option. To display a list of support link options from xilink , use the following command: >> xilink /qhelp `xilink.exe` accepts all the options of `link.exe` and will pass them on to `link.exe` at the final linking stage.

Windows* Linking Behavior Summary

The linking tool invokes the Intel® Fortran Compiler to perform multi-file IPO if objects containing IR (intermediate representation) is found. These are mock objects. It invokes the Microsoft linker link.exe to link the application.

The command-line syntax for the Intel® linker is the same as that of the Microsoft linker:

xilink [<options>] <normal command-line>

where:

[<options>]: One or more options supported only by xilink (optional).
<normal command-line>: Linker command line containing a set of valid arguments for the Microsoft linker.

To place the multifile IPO executable in ipo_file.exe, use the linker option out:[filename], for example:

xilink -qipo-fas /out:ipo_file.exe a.obj b.obj c.obj

The linker calls the compiler to perform IPO for objects containing IR and creates a new list of object(s) to be linked. The linker calls Microsoft link.exe to link the object files that are specified in the new list and produce the application with the name specified by the out:[filename] linker option.

To display a list of support link options from xilink , use the following command:

>> xilink /qhelp

xilink.exe accepts all the options of link.exe and will pass them on to link.exe at the final linking stage.

Using the Linking Tools

You must use the Intel® linking tools to link your application if the following conditions apply:

Your source files were compiled with multi-file IPO enabled. Multi-file IPO is enabled by specifying compiler option [Q]ipo.
You would normally invoke the GNU linker (ld) to link your application.
You would normally invoke the Microsoft linker (link.exe) to link your application.

Linker Options

The following table provides information on linking options.

Linking Tools Option	Description
qdiag-[`type`]=[`diag-list`]	Controls the display of diagnostic information. The `type` is an action to perform on diagnostics. Possible values are: Enable: Enables a diagnostic message or a group of messages. Disable: Disables a diagnostic message or a group of messages. The `diag-list` is a diagnostic group or ID value. Possible values are: thread: Specifies diagnostic messages that help in thread-enabling a program. vec: Specifies diagnostic messages issued by the vectorizer. par: Specifies diagnostic messages issued by the auto-parallelizer (parallel optimizer). openmp: Specifies diagnostic messages issued by the OpenMP* parallelizer. warn: Specifies diagnostic messages that have a "warning" severity level. error: Specifies diagnostic messages that have an "error" severity level. remark: Specifies diagnostic messages that are remarks or comments. cpu-dispatch: Specifies the CPU dispatch remarks for diagnostic messages. These remarks are enabled by default. id[,id,...]: Specifies the ID number of one or more messages. If you specify more than one message number, they must be separated by commas. There can be no intervening white space between each "id". tag[,tag,...]: Specifies the mnemonic name of one or more messages. If you specify more than one mnemonic name, they must be separated by commas. There can be no intervening white space between each "tag". Note Diagnostic messages generated by this option can be affected by other options, such as /arch (Windows), -m (Linux and OS X*), or [Q]x.
qm32, qm64	qm32 generates code for IA-32 architecture. qm64 generates code for Intel® 64 architecture. For example, when your compilation environment is configured for Intel® 64 architecture, and you use [Q]m32 with the compiler, you also need to use qm32 on the linker command line to make sure the proper compilation target is set up for any IPO compilations or the final link.

Linking Tools Option

Description

qdiag-[type]=[diag-list]

Controls the display of diagnostic information.

The type is an action to perform on diagnostics. Possible values are:

Enable: Enables a diagnostic message or a group of messages.
Disable: Disables a diagnostic message or a group of messages.

The diag-list is a diagnostic group or ID value. Possible values are:

thread: Specifies diagnostic messages that help in thread-enabling a program.
vec: Specifies diagnostic messages issued by the vectorizer.
par: Specifies diagnostic messages issued by the auto-parallelizer (parallel optimizer).
openmp: Specifies diagnostic messages issued by the OpenMP* parallelizer.
warn: Specifies diagnostic messages that have a "warning" severity level.
error: Specifies diagnostic messages that have an "error" severity level.
remark: Specifies diagnostic messages that are remarks or comments.
cpu-dispatch: Specifies the CPU dispatch remarks for diagnostic messages. These remarks are enabled by default.
id[,id,...]: Specifies the ID number of one or more messages. If you specify more than one message number, they must be separated by commas. There can be no intervening white space between each "id".
tag[,tag,...]: Specifies the mnemonic name of one or more messages. If you specify more than one mnemonic name, they must be separated by commas. There can be no intervening white space between each "tag".

Note

Diagnostic messages generated by this option can be affected by other options, such as /arch (Windows*), -m (Linux* and OS X*), or [Q]x.

qm32, qm64

qm32 generates code for IA-32 architecture.

qm64 generates code for Intel® 64 architecture.

For example, when your compilation environment is configured for Intel® 64 architecture, and you use [Q]m32 with the compiler, you also need to use qm32 on the linker command line to make sure the proper compilation target is set up for any IPO compilations or the final link.

Linking Tools and Options

Using the Linking Tools

Linker Options

Note

See Also